R DUAL 266
R Series Servo-controlled solenoids
R Series Direct Solenoids
-
Physical characteristic
- Body valve PA 66 - 30% glass fiber
-
Working specifications
- Working pressure 0,2 - 10 bar
- Room temperature Tu 60° C
- Fluid temperature Tm 25° C
- Control NC, NO, Latching
- Fluid direction Unidirectional
-
Electrical Connections
- Faston 6,3 x 0,8 mm
- Unipolar wires max 5000 mm
- Bipolar wires max 5000 mm
-
Hydraulic connections
- Inlet: 3/4” male thread
- Outlet: Spigot 10 mm
-
Pilot
- Diaphragm: NBR; LSR
- Core: Stainless steel
- Coils: F class (155°)
- Assembly: Self-tapping screws
-
Flow meter
- Flow meter body: POM
- Assembly: Self-tapping screws
-
Pressure Restrictor
- Restrictor body: PA 66 - 30% glass fiber
- Restrictor cap: PA 66 - 30% glass fiber
- Gasket: Silicone
- Diaphragm: EPDM + textile coupled
- Core: POM
- Blocking particulars: PA 66 - 30% glass fiber
-
Filter
- Filter body: PA 66 - 30% glass fiber
- Filter cap: PA 66 - 30% glass fiber PA 66 - 30% glass fiber
- Gasket: Silicone
- O-Ring: NBR; LSR
- Filter mesh: Stainless steel
- Filter orifice: ND 10 mm
Datasheets
| PILOT ↓ | PRESSURE RESTRICTOR ↓ | FLOW METER ↓ | FILTER↓ | |
| PILOT → | Technical Sheet | YES | YES | NO SENSE |
| PRESSURE RESTRICTOR → | Technical Sheet | NOT POSSIBILE | YES | NOT POSSIBILE |
| FLOW METER → | Technical Sheet | YES | NO SENSE | NO SENSE |
| FILTER → | YES | NOT POSSIBILE | YES | NOT POSSIBILE |
Accessories
| Connections | Flow regulator | Flow restrictor | Filter | Check Valve | |
| IN | 3/4" M | ||||
| OUT | Spigot 10mm |
