R Series Dual 004
Flow rate
R Series Servo-controlled solenoids
R Series Direct Solenoids
Presentation
-
Physical characteristic
- Valve body: PA 66 - 30% GF
-
Working specifications
- Working pressure: 0,2 - 10 bar
- Room temperature: Tu 60° C
- Fluid temperature: Tm 25° C
-
Control:
Normally closed (NC),
Normally open (NO),
Latching (LC) - Fluid direction Unidirectional
-
Electrical Connections
- Faston 6,3 x 0,8 mm
- Unipolar wires max 5000 mm
- Bipolar wires max 5000 mm
-
Hydraulic connections
- Inlet: 3/4” male thread
- Outlet: 3/4” male thread
-
Pilot
- Diaphragm: NBR; LSR , EPDM
- Core: Stainless steel
- Coils: F class (155°)
- Assembly: Self-tapping screws
-
Flow meter
- Flow meter body: POM
- Assembly: Self-tapping screws
-
Pressure Restrictor
- Restrictor body: PA 66 - 30% glass fiber
- Restrictor cap: PA 66 - 30% glass fiber
- Gasket: Silicone
- Diaphragm: EPDM + textile coupled
- Core: POM
- Blocking particulars: PA 66 - 30% glass fiber
-
Filter
- Filter body: PA 66 - 30% glass fiber
- Filter cap: PA 66 - 30% glass fiber
- Gasket: Silicone
- O-Ring: NBR; LSR
- Filter mesh: Stainless steel
- Filter orifice: ND 10 mm
Datasheets
| PILOT ↓ | PRESSURE RESTRICTOR ↓ | FLOW METER ↓ | FILTER ↓ | |
| PILOT→ | NOT POSSIBLE | NOT POSSIBLE | YES | NO SENSE |
| PRESSURE RESTRICTOR → | NOT POSSIBLE | NOT POSSIBLE | YES | YES |
| FLOW METER → | Technical sheet | YES | NO SENSE | NO SENSE |
| FILTER → | YES | Technical sheet | YES | Yes |
Technical additional data sheet
| Connection | Flow regulator | Flow restrictor | Filter | Check valve | |
| IN | 3/4" M | NO | NO | NO | NO |
| OUT | 3/4" M | NO | NO | NO | NO |
Additional Information
